Sunday, February 17, 2013

Marine plywood arrives!

Medway Lumber called me on Friday and told me my plywood had come in. I drove over Saturday morning and they helped me load it on top of my Jeep with their forklift. The plywood was nicely packaged with scab plywood on each side to protect the marine plywood. Once I got it home, I removed the plastic wrap and unloaded it one piece at a time.






Below are the sheets on my work surface. I have 2 sheets of 3/8" and 5 sheets of 1/4" to start with. The 7 sheets cost $350. Now I have to order my epoxy and make some practice scarfs with my belt sander on some scrap plywood. My plan is to make my 3 scarfs first and make good use of the flat working surface.


No comments:

Post a Comment